Compatible Product configuration and testing notes for RG-644 by Allied Telesis Multimedia with DMS-10


-The test effort verified a basic level of interoperability between the Allied Telesyn RG-644 version 2.3.59.01.08 and the Nortel DMS-10. This successful testing establishes the Allied Telesyn RG-644 as a Nortel compatible product for the releases tested. Testing included basic communication and basic call functionality between the devices. It is the service provider’s responsibility to perform appropriate system and network integration of the Allied Telesyn RG-644 with the DMS-10 based on their network deployment requirements.

Nortel testing included:

> Basic line to line voice call functionality of the RG-644 using Nortel DMS-10 call control:
> Basic line to line voice calls intra RG-644
-    call to idle line with answer
-    call to idle line, ringing timeout
-    call to busy line
-    call to busy line, busy tone timeout
-    call to busy line with call waiting
-   one hour duration call
-   outgoing ISUP trunk call
-   outgoing MF trunk call
-   0- (Zero minus) and 00- call
-   N11 call
-   0+ (Zero plus) 10 digit call
-   Service Access Calls (*nn)
-   Post cut-through digits call
-   Basic SIP to SIP call
-   SIP to SIP ISUP trunk call
-   SIP to SIP MF trunk call
-   Unconditional call forward
-   Call forward busy
-   Call forward no answer
-   Call waiting / Disable call waiting
-   Caller ID / Call waiting caller ID
-   Calling line name and number presentation and restriction
-   Unattended (blind) call transfer
-   Attended (Consultation) call transfer
-   Transfer to a busy station
-   3-Way Calling
-   Automatic call back
-   Anonymous call blocking
-   Selective call blocking
-   Speed dialing
-   Do not disturb
-   Call hold
-   verify SIP Protocol traces


>   RTP Packet Evaluation
>   SIP packets analyzed to ensure proper construction as requested by DMS-10

Not tested by Nortel:

*   Voice quality (no MOS/PSQM validation).
*   Redundancy/Carrier Grade Maintenance
*   General SIP protocol conformance outside that which is specific to DMS-10

Anomalies

*   3_way calling is under going further testing


>Back to first page of Compatible Product certificate

Compatible Product Disclaimer
The Developer Product listed is verified in a laboratory environment as compatible with the indicated Nortel Product for a term of two (2) calendar years from the date the Compatibility Test Audit was successfully completed as indicated above, until the Developer issues a new version of such Developer Product that incorporates new features or functionality or until such time as Nortel issues a new version of such Nortel Product that incorporates new features or functionality, whichever occurs first. NORTEL MAKES NO REPRESENTATIONS, WARRANTIES OR CONDITIONS WITH RESPECT TO THE DEVELOPER PRODUCT OR THE NORTEL PRODUCT. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, NORTEL HEREBY EXPRESSLY DISCLAIMS ANY AND ALL REPRESENTATIONS, WARRANTIES OR CONDITIONS OF ANY NATURE WHATSOEVER AS TO THE DEVELOPER PRODUCT AND THE NORTEL PRODUCT INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY, NON INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE AND NORTEL FURTHER SHALL HAVE NO LIABILITY TO DEVELOPER OR ANY OTHER PARTY ARISING FROM OR RELATED IN ANY MANNER TO THIS CERTIFICATE OF COMPATIBILITY. Nortel, the Nortel logo, and the Globemark are trademarks of Nortel Networks.